Ovation e-Amp: A 180 Watt Class AB VFA Featuring Ultra Low Distortion
The e-Amp is a 180 Watt RMS (very conservatively rated into 8 Ω ) fully balanced symmetrical (‘FBS’) amplifier featuring an emitter follower triple (EFT) bipolar output stage and beta enhanced VAS stage. The amplifier can be configured using jumpers for TMC (Transitional Miller Compensation) or straight Miller compensation (MC). The VAS can be lightly […]
Ovation 250 Power Amplifier
The Ovation 250: A 250W per Channel Audio Power Amplifer (updated 1st June 2013) This amplifier was built in 2005/2006 and this write-up originally published in 2009. Introduction Diy Audio is a wonderful activity:- if you cannot afford a $10 000 power amp, you can always build one that comes pretty damn close in terms of sonics […]
Hifisonix UBx Universal JFET Buffer
A while back, one of the diyAudio forum members who was building the nx-Amp (here’s the thread on DIYaudio.com) enquired about either reducing the amplifier’s overall gain, or providing a volume control facility. Since both the 15 W class A sx-Amplifier and its bigger 100W sibling the nx-Amplifier, are Current Feedback Amplifiers, performance is quite […]