Your basket is currently empty!
Articles
Welcome to our articles page, where you’ll find a wealth of information on everything audio-related. Our articles cover various topics that will appeal to audiophiles of all levels.
-
CFA Diamond Buffer IPS: Does it Operate in Class B or class A?
There is a persistent assertion by small group of amplifier design practitioners that the diamond buffer input stage of CFA audio amplifier operates in class B (or AB) mode wherein there is a hard ‘handover’ between each half of the diamond buffer input stage as the input signal passes through 0V. The most recent claim…
-
More Notes On Cascode Amplifier Oscillation
Here is a short write up on cascode oscillation I did back in 2012 when designing and developing the e-Amp. Cascode Oscillation in Audio Amplifiers.pdf I recently (2017) had a recurrence of the problem on another high power design – some pictures are shown below. When I went back and looked at the notes above,…
-
Baxandall’s Original Tone Control Article from Wireless World 1952
This article was published in October of 1952, when Baxandall was 31 years old, the design having already won him a prize 2 years earlier in a competition. His design basically relegated other tone control circuits to the scrap heap, although cheap passive, or non-inverting circuits still persisted well into the 1980’s, especially in low…
-
Stan Curtis 60W Class A Amplifier from ETI
Stan Curtis was involved in both engineering and management roles in companies like Quad, Cambridge, Rotel (a family owned Japanese brand) Mission and Lecson to name a few. He is primarily an audio business consultant and remains highly respected and a noted product designer within the sector in his own right. This is his 60…
-
Low Cost Isolation Amplifier for Industrial Applications
A Design Idea of mine that appeared in EDN around 2000. The article appeared with the title ‘Lost Cost . . . ‘ – seems someone got a bit mixed up. The idea has been referenced in a few papers on the web – always good to see! Low_cost_isolation_amplifier_suits_industrial_applications Here’s another one using a delta…
-
Hifisonix UBx Universal JFET Buffer
A while back, one of the diyAudio forum members who was building the nx-Amp (here’s the thread on DIYaudio.com) enquired about either reducing the amplifier’s overall gain, or providing a volume control facility. Since both the 15 W class A sx-Amplifier and its bigger 100W sibling the nx-Amplifier, are Current Feedback Amplifiers, performance is quite…
-
OPEX-1: A Discrete OPAMP for Audio
This design showcases a discrete opamp for audio applications. It features very low noise, low distortion and a class A output stage that will deliver 1ppm distortion into a 600 Ohm load at 12 V peak. OPEX-1-Discrete-Opamp
-
Solid State Relay with PCB Layout
A complete relay that is smaller than a Tyco RT series EMR Simple_solid_state_relay_Updated . This design uses a small double sided PCB and some SMD components. Here are the Gerber files SSLR. The recomended mosfets for this design are the PSMN4R3-100PS[1] for supply rails of up to +-50 V absolute maximum, and for supply rails of up…
-
Augmented Feedback Error Correction (AFEC)
AFEC is a simple technique that augments the feedback of an amplifier to dramatically improve the Large Signal Non-linearity (LSN) distortion performance by up to 20 dB across the audio band. Additionally, AFEC acts to remove any DC offsets and also improve PSRR significantly. Augmenting the feedback in a manner similar to that described in…