Ovation nx-Amplifier

Ovation nx-Amplifier: A 100 W class AB Current Feedback Amplifier

This power amp design is based on the sx-Amplifier topology, but with the TIS and output stage re-configured for class AB operation, enabling it to deliver 100 W into 8 Ohms. I have kept the design very simple, retaining the CFA topology, providing a very wide -3 dB bandwidth of 570 kHz, high slew rates (140 V/us) and low distortion.

Amplifier write up with circuit description, wiring diagram and construction details and BOM list:-  The Ovation nx-Amplifier V2.0_9  (updated November 2014 to V2.0 PCB’s incorporating all feedback and updates)

You can get a complete set of  double sided THP Gold Plated V2.0 PCB’s for the above from Jim’s Audio on ebay here:

nx-Amplifier PCB Set

(2 off nx-Amplifier boards + 1 off  PSU +Protect for about $26 excl. shipping).

1. The nx&sx-Amp PSU board is a simple unregulated PSU board with no muting, output short circuit or DC offset  protection. The only protection is the amplifier module fuses

2. .  The nx-Amp_PSU+Protection board option  couples an unregulated PSU with speaker muting, output short circuit protection  and DC offset detection protection.

See the nx-Amplifier article above for details.  If you have any questions, feel free to post your questions up here.

If you are a manufacturer, kit supplier or DIY shop, and you want to use the designs (circuit or PCBs) you need to contact me.

I’d be happy to hear your comments/feedback.